“One oxygen flowmeter” can mean different products to different suppliers. Does the facility need a cylinder pressure regulator, a flowmeter for an existing regulated supply, or an assembly combining functions? For a buyer in Uganda, settling that question first prevents a quotation for the wrong connection or application.

Separate pressure regulation from flow measurement
A cylinder regulator reduces high cylinder pressure to the working pressure required by the connected system. A flowmeter sets or indicates flow within its intended configuration. WHO–UNICEF guidance describes these functions and the different cylinder connections and outlet arrangements available.
Some products combine functions, but the word “oxygen” does not make them interchangeable. Ask the clinical and biomedical teams to define whether the assembly will supply a patient-delivery setup or another medical device. This is procurement guidance, not an oxygen prescription or instruction for connecting pressurised gas equipment.
Identify the cylinder and inlet connection
Provide the cylinder valve identification and existing regulator reference where available. Ask a competent person to obtain the required information safely; do not disconnect a live system just to take a purchasing photograph. The gas supplier and technical team should confirm the connection and permitted inlet conditions.
Request the offered regulator’s documented compatibility. Do not approve a purchase by cylinder colour, a similar-looking thread or a seller’s generic “universal” description. Do not modify fittings or use makeshift adapters to overcome a mismatch. A medical oxygen system requires appropriate gas-specific components and competent installation.
Specify the outlet and application
For a device supplied by regulated oxygen, obtain the manufacturer’s required pressure, flow capacity and connection details. For a patient-delivery arrangement, the clinical lead should specify the required flow range and suitable delivery accessories. Do not choose a range merely because its maximum number is larger.
Ask which outlet fittings and accessories are included, and which are separate. Humidification equipment, where required by the approved clinical setup, should be identified rather than assumed from a catalogue photograph. An assembly suitable for one application may not be suitable for another.
Compare complete quotations
Request the manufacturer and model, inlet and outlet specifications, intended use, included gauges or flowmeter, accessories, instructions, warranty and technical checks. Have your biomedical team review the offered configuration before ordering.
For illustration, a quotation for a wall-supply flowmeter does not replace a missing cylinder regulator, even if both products display a flow scale. Mark the oxygen source on the enquiry and ask the supplier to identify every necessary component. Our oxygen concentrator guide covers a different source-selection question, not cylinder-regulator compatibility.
Arrange acceptance and support
Ask who will inspect the delivered assembly, confirm compatibility and complete the specified safety and performance checks before use. Keep the product documentation and asset identification with the receiving record. Never treat a pressure gauge moving as a complete acceptance test.
Confirm training, servicing and replacement-part arrangements for the selected model. Staff should follow the applicable oxygen safety procedures, including keeping oil and grease away from oxygen equipment. Suspected leaks, damage or incorrect connections require competent technical attention, not improvised repair.
Send Exper your Uganda destination, oxygen-source details, intended application, equipment list and quantities through the medical equipment enquiry page. Ask for a documented configuration and current availability. Our quotation comparison guide helps identify exclusions.
Technical reference reviewed 14 November 2026: WHO–UNICEF technical specifications and guidance for oxygen therapy devices. Final selection and use must follow the actual equipment instructions and the facility’s approved procedures.
Contact +256 756 789 821 or info.brandexper@gmail.com with your destination, equipment list and quantities. Exper requires 100% payment before delivery. Request current availability and written terms for your order.
